一种高灵敏的压电免疫传感器用于高密度脂蛋白的测定

采用自组装单层膜(SAMs)技术在压电石英晶体的金电极表面组装巯基丙酸SAMs,以盐酸1-乙基-3-(3-二甲基氨基丙基)碳二亚胺(EDC)和N-羟基琥珀酰亚胺(NHS)作偶联剂,以共价键合方式固定高密度脂蛋白抗体,研制成一种高灵敏的压电免疫传感器用于检测人血清中低含量的高密度脂蛋白。利用压电装置的实时监测功能,考察了巯基丙酸在金电极表面的自组装成膜过程与机制;研究了晶振固定抗体及其反应结合抗原的液相振荡行为和传感特性。传感器采用初始速率法测定高密度脂蛋白的线性浓度范围为1.63~18.8 mg.L-1,检出限为0.82 mg.L-1。     

改性HZSM－5催化剂上4－甲基联苯与甲醇的甲基化反应性能

 采用浸渍法制备了一系列金属氧化物（MgO，CaO，SrO，BaO，ZnO，La2O3和CeO2）改性的HZSM－5催化剂，以4－甲基联苯与甲醇的烷基化为探针反应，在固定床反应器上考察了其催化性能．结果表明，在MgO改性的HZSM－5催化剂上，目的产物4，4′－二甲基联苯的选择性最高，可达80％，而在未改性的HZSM－5上仅为13％．金属氧化物改性对4，4′－二甲基联苯的选择性均有提高，其大小顺序为：MgO＞SrO≈ZnO≈CaO≈La2O3＞BaO＞CeO2．另外，还详细研究了MgO改性条件（如MgO浸渍量，改性剂的阴离子种类，改性方法）的影响．结果表明，MgO浸渍量为5．6％时较为合适．     

喷气燃料的化学组成与理化性质的定量关系研究

利用GC/MS分析了80个喷气燃料样品的烃族化学组成,将其分为直链烃、异构烃、环烷烃、芳烃、十氢萘五大类,并测定了燃料的密度、苯胺点、热值、冰点、闪点及沸程等主要理化性质.构建了喷气燃料组成和性质关系的数据库,考察了喷气燃料的烃族组成及沸程对各种性质的影响.结合Cookson等的理论,建立了八个模型方程,通过多元线性回归预测烃族化学组成与理化性质关系, 与已报道的其他方程比较,新模型的相关系数明显提高.     

铁氰化锰修饰玻碳电极的制备及其电化学性能

A thin film of manganese hexacyanoferrate （MnHCF） was electrochemically formed on a glassy carbon （GC） electrode to prepare a chemically modified electrode （CME）. The mechanism of film formation of MnHCF and its growth process were investigated in detail by cyclic voltammetry. The results show that the stoichiometric composition of MnHCF is Mn^ⅢFe^Ⅲ（CN）6, an analogue of prussian yellow. There exist three clear-cut stages in the whole modification process and the last stage is indispensable to the fabrication of homogenized, stable MnHCF film and must last for an appropriate time. The surface morphology of MnHCF/GC electrode was characterized by scanning electron microscopy （SEM）, which further verified the effective deposition of MnHCF film on GC. The kinetic constants of MnHCF/GC electrode process were also evaluated. The resulting MnHCF film modified electrode presented good stability and high electrocatalytic activity toward the oxidation of H2O2, indicating that MnHCF film possesses function of catalase and can be expected for analytical purposes.     

基于天然氨基酸的双环手性季铵盐相转移催化剂的合成及催化性能研究

以L－脯氨酸及L－羟基脯氨酸为原料合成了4个新型手性季铵盐磁相转移催化 剂，并用于催化不对称查耳酮环氧化反应，高产率得到相应环氧化合物，ee最高达 9％。     

胶束增强型聚电解质微胶囊的制备

采用杂化碳酸钙微球作为模板, 利用LbL技术, 选择聚苯乙烯磺酸钠(PSS), 烯丙基胺的盐酸盐(PAH)和二烯丙基二甲基胺盐酸盐(PADA)聚电解质, 分别组装了PAH/PSS(弱/强)聚电解质胶囊和PADA/PSS(强/强)聚电解质微胶囊. 除去模板后得到了球形良好、分散均匀的聚电解质微胶囊. 研究结果表明, 利用杂化碳酸钙微球作为聚电解质微胶囊的模板, 得到的微胶囊的囊壁厚而致密, 同时, 由于组装采用的聚电解质的种类不同, 囊壁的微观形貌有较大差异.     

FREQUENCY DEPENDENCE OF THE DIELECTRIC RELAXATION OF 1,2-POLYBUTADIENES

The dielectric loss factor and permittivity of a series of 1, 2-polybutadienes with different contents of 1, 2-units and different contents of syndiotactie 1, 2-units were determined over a frequency range from 30Hz to 100KHz at different temperatures. The WLF equation was evaluated for various samples with T_θat 100KHz as a reference temperature and the master curves of various samples have been constructed, which are in accordance with those calculated by Havriliak-Negami equation. The frequency dependence of the dielectric relaxation of 1, 2-polybutadienes was investigated over a frequency range from 10~0 Hz to 10~(12) ZHz in terms of the experimental data and the master curves.     

离子液体支载稀土催化剂催化 2,2-二甲基-三亚甲基碳酸酯均聚及其与ε-己内酯的共聚

首次合成了离子液体支载稀土催化剂,并探讨了其催化2,2-二甲基-三亚甲基碳酸酯(DTC)均聚及其与ε-己内酯(ε-CL)的共聚,结果表明该新型催化剂能有效地催化DTC的均聚及其与ε-CL的共聚.研究了不同稀土以及加料顺序等反应条件对聚合的影响,发现轻稀土的催化活性比重稀土高,其中离子液体支载La催化剂的催化活性最高,而通过控制不同的加料顺序可以制备DTC和ε-CL的无规及嵌段共聚物.对共聚物结构进行了表征.     

2,2''''-联吡啶和亚铁氰化钾对乙醛酸化学镀铜的影响

以乙醛酸作还原剂、Na2EDTA为络合剂、2,2'-联吡啶和亚铁氰化钾作为添加剂组成化学镀铜体系,研究了两种添加剂对化学镀铜速率、镀层表面形貌、组成和结构的影响.结果表明:添加适量的2,2'-联吡啶和亚铁氰化钾,不仅提高了镀液的稳定性,而且使沉积速率增加1倍.这两种添加剂的同时使用,使镀层颜色变亮,形貌发生变化.所得镀层是多晶铜,没有发现夹杂Cu20.     

纳米镍-铁合金/膨胀石墨复合材料的制备、表征及其电磁屏蔽性能

The composites with nano-particles of Ni-Fe alloys dispersed on the nano-layers of expanded graphite (EG) were prepared by the impregnation of EG with ethanol solutions of nickel and iron acetates， followed by drying and reduction in H₂. The square nano-particles of Ni-Fe alloys with particle sizes of mainly 20～40 nm were found to be well spread on the layers of EG. The alloy nano-particles exhibited high shielding effectiveness (SE) for electromagnetic radiations at low frequencies due to their high magnetic conductivity. Since EG is electronically conductive and displayed high SE at high frequencies， the composites exhibited good SE at wide range of frequencies. The electric and magnetic conductivities of the composites could be monitored through regulating the loadings of alloy nano-particles on EG， and it was found that the composites with 20%～40% of the alloys exhibited good SE. Specifically， the composite 27%Ni-3%Fe-EG showed the excellent SE from 66 to 110 dB at the frequencies from 300 kHz to 1.5 GHz.